Punkt dostępu Aruba (HPE) JW245A

SKU
JW245A
5 299,03 zł
EAN: 19503
Stock: Dostępne na zamówienie
Lead time: 25-35 dni
GPL price:

1495 $

Aruba Instant IAP-228 (RW) 802.11n/ac Dual 3x3:3 Radio 6xRPSMA Cnctr Inst Indoor Hardened AP

Punkty dostępu Aruba (HPE) zapewniają szybki i stabilny bezprzewodowy transfer danych w sieci firmowej. Aruba oferuje zarówno proste urządzenia zapewniające podstawową funkcjonalność sieci Wi-Fi, jak i sieci o dużym zagęszczeniu użytkowników i prędkościach dochodzących 2 Gbit/s, a także modele chronione do pracy w trudnych warunkach klimatycznych.

Punkty dostępowe są łatwe w instalacji i mogą działać jednocześnie w różnych zakresach 2,4 I 5 GHz, korzystać z technologii MIMO Zwiększyć prędkość transferu danych i obsługiwać standard 802.11ac Wave2.

Instant-Punkty dostępu Aruba — nie wymagają osobnego kontrolera, lecz wykorzystują kontroler wirtualny, którego funkcje realizuje jeden z punktów. HPE Aruba Instant — jest to rozwiązanie, które pozwala na wdrożenie «bez kontrolera» Korporacyjna sieć Wi-Fi. Ma już wbudowane zabezpieczenia sieciowe, automatyczne sterowanie RF i wystarczającą liczbę inteligentnych funkcji, aby uruchomić kompletne rozwiązanie bez dodatkowych licencji. Klaster punktów dostępowych zarządzany jest za pomocą wirtualnego kontrolera, który znajduje się na jednym z punktów dostępowych (IAP). Kontroler jest odpowiedzialny za proces autokonfigurowania nowych punktów dostępu, autoryzacji i uwierzytelniania, dostępu do gości i usług sieciowych (NAT, DHCP itd.). 

Dane techniczne Punkty dostępu Aruba (HPE) JW245A:   

AP-228 SPECIFICATIONS

  • 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors.

 

WIRELESS RADIO SPECIFICATIONS

  • AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11nSoftware-configurable dual radio supports 5 GHz and 2.4 GHz
    • In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.
  • 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
  • Supported frequency bands (country-specific restrictions apply):Available channels: Dependent on configured regulatory domain
    • 2.4000 GHz to 2.4835 GHz
    • 5.150 to 5.250 GHz
    • 5.250 to 5.350 GHz
    • 5.470 to 5.725 GHz
    • 5.725 to 5.850 GHz
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • 802.11n/ac: 3x3 MIMO with up to three spatial streams
  • Supported modulation types:Transmit power: Configurable in increments of 0.5 dBm
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
    • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems
    • 2.4-GHz band: +28 dBm (23 dBm per chain)
    • 5-GHz band: +28 dBm (23 dBm per chain)
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay diversity (CDD) for improved downlink RF performance
  • Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased reliability in signal delivery
  • Supported data rates (Mbps):802.11n high-throughput (HT) support: HT 20/40
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 450 (MCS0 to MCS23)
    • 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)
  • 802.11ac very high throughput (VHT) support: VHT 20/40/80
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

 

POWER

  • Worst-case power consumption from the AP: 23W
  • Power sources sold separately
  • Power over Ethernet (PoE+): 802.3at-compliant

 

OTHER INTERFACES

  • Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)Serial console interface (Micro USB)
    • Auto-sensing link speed and MDI/MDX
    • Load balancing support to achieve platform throughput greater than 1 Gbps
    • PoE-PD: 802.3at PoE+

 

MOUNTING

  • Optional mounting kits
    • AP-220-MNT-W1 is directly compatible
    • 270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized

 

MECHANICAL

  • Dimensions/weight (unit, excluding mount accessories):
    • 222 mm (L) x 150 mm (W) x 75 mm (H), 8.5” (L) x 6” (W) x 2.5” (H)
    • 1.225 kg/2.700 lbs

 

ENVIRONMENTAL

  • Operating:
    • Temperature: -40° C to +60° C (-40° F to +140° F)
    • Humidity: 5% to 95% non-condensing
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)
    • Operating Altitude: 3,000 m

 

ANTENNAS

  • Six RP-SMA connectors for external antennas

 

REGULATORY

  • FCC/Industry of Canada
  • CE Marked
  • R&TTE Directive 1995/5/EC
  • Low Voltage Directive 72/23/EEC
  • EN 300 328
  • EN 301 489
  • EN 301 893
  • UL/IEC/EN 60950
  • EN 60601-1-1 and EN 60601-1-2
  • For more country-specific regulatory information and approvals, please see your Aruba representative.

 

REGULATORY MODEL NUMBERS

  • AP-228 and IAP-228: APIN0228

 

CERTIFICATIONS

  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

 

WARRANTY

  • Aruba limited lifetime warranty

 

MINIMUM SOFTWARE VERSION

  • ArubaOS 6.4.3.0
  • Aruba Instant 4.2.0

 

Код товару 19503
Producent Aruba